Automatic
One Head Mitre Saw
Technical
Features
Width : 750 mm
Depth : 900 mm
Height : 1200 mm
Voltage : 220 / 380 V
Frequency : 50 Hz.
Power : 2 HP
Cycle : 3000 d / dk
Air Pressure : 6 - 8 bar
Air Consumption : 9 Lt / dak. min.
Weight : 195 kg
Features
*Operates for cutting of PVC and aluminium profiles.
*The square being mobile it provides the big pieces
to be cut in a straight way or in angled.
*Performs between 45 - 90 degrees.
*Operates with fully automatic pneumatic system.
*The speed of the can be adjusted to the required speed
Four
Head Corner Cleaning Machine
Technical
Features
Width : 800 mm
Depth : 1000 mm
Height : 1450 mm
Voltage : 380 V
Frequency : 50 Hz.
Power : 1.5 HP
Cycle : 3000 d / dk
Air Pressure : 6.8 bar
Air Consumption : 7 Lt / dak. min.
Weight : 300 kg
Features
*Achives the cleaning operation of welded PVC profiles
*P.L.C. controlled security is available.
*Profile centering system operatesduring operation.
*Upper and lower cleaning blades can operate
independent from frontal operating blades.
*Profile centering system operatesduring operation.
Automatic
Triple Drilling
Copy&Water Slot Drainage
Machine
Technical
Features
Width : 750 mm
Depth : 900 mm
Height : 1500 mm
Voltage : 380 V
Frequency : 50 Hz.
Power : 1.5 HP
Cycle : 1400 d / dk
Air Pressure : 6 - 8 bar
Air Consumption : 4 Lt / dak. min.
Weight : 120 kg
Features
*Using for water drainage operation of PVC profiles.
*By means of the copy mechanism that exists in its
pattern,it drills holes for locks,bars,hinges and window.
*It is used to drill the holes for bars and window
fastenins of the PVC profiles
*Full automatic working system
*Pneumatic profile clamping unit.
End
Milling Machines
Technical
Features
Width : 600 mm
Depth : 500 mm
Height : 1000 mm
Voltage : 220 / 380 V
Frequency : 50 Hz.
Power : 2 HP
Cycle : 3000 d / dk
Air Pressure : 6 - 8 bar
Air Consumption : 2 Lt / dak. min.
Weight : 80 kg
Features
*Endmilling on PVC and aluminium profiles.
*Cutler set will be assembled according to the profile
type
*Hydropneumatic adjustable milling feed
*Pneumatic clamping eguipment.
*Manuel feed of milling unit.
| |
Automatic
Glazing Bead Saw
Technical
Features
Width : 600 mm
Depth : 1100 mm
Height : 1100 mm
Voltage : 380 V
Frequency : 50 Hz
Power : 1 HP x 2
Cycle : 3000 d / dk
Air Pressure : 6.8 bar
Air Consumption : 6 Lt / dak.min.
Weight : 140 kg
Features
*Fully automatic 45 degree cutting of glazing bead.
*With a scale on the stop bar,for longer windovs
glazing beads can also be cut from longer rod stock
*High qality clamping tools
*Pneumatic feeding sawblade automatic working
cycle infinitely variable speed.
*Machine is improved by fully automatic pneumatic
system
*Variable length stop and special device for taking
precies measure from welded frames.
Aluminiun
Corner Press
Technical
Features
Width : 1200 mm
Depth : 800 mm
Height : 1250 mm
Voltage : 380 V
Frequency : 50 Hz.
Power : 3 HP
Cycle : 1500 d / dk
Weight : 320 kg
Features
*Pneumatic profile clamping unit
*Machine is operating with hydraulic system
*It is used for joining the corners of aluminium profile
by using external parts with high pressure
Single
Corner Welding Machine
Technical
Features
Width : 700 mm
Depth : 700 mm
Height : 1400 mm
Voltage : 220 V
Frequency : 50 Hz.
Power : 1600 Watt
Air Pressure : 6 - 8 bar
Air Consumption : 6 Lt / dak. min.
Weight : 200 kg
Features
*Corner welding of PVC profiles.
*Upper pistons with the oppurtunity of pressing separately.
*Instant digital display of heater plate
*One of the most important adveentages provided by our
machine,is the opportunity of achieving the last corner's
welding in small window constructions.
|
Homepage 
